BATUR3D 3D Print Polishing
1) BATUR3D Stick Toolkit
Hello, welcome to BATUR3D. During the application, we work with 3D printable tools. With the ...
2) BATUR3D Block Toolkit
During the application, we work with 3D printable tools. With the tools, we perform sanding a...
3) Recommended Shopping List
There are commercially available products that we use in practice. These products must be suppl...
4) Introduction of BATUR3D Polishing Process
BATUR3D POLISHING™ system and its details are explained with contents. You should study the con...
5) Introduction of 3D Printable Toolkits
We continue by getting to know the 3D printable tools we used during the application. [Edit] T...
6) Preparations of Stick Tools
3D printing has been completed for this toolkit. We will prepare the tools for use. We make san...
7) Preparations of Block Tools
3D printing has been completed for this toolkit. We will prepare the tools for use. We make san...
8) Materials Sizing with Templates
We cut sandpapers and foams in sizes suitable for the tools with templates. Different sizes of ...
9) Recommended Working Layout
The working layout, which is an important issue that directly affects the application, is expla...
10) BATUR3D Polishing Process
BATUR3D POLISHING™ process main elements and all details are presented to you. When applying, c...
11) Application of STEP 1 (Sanding)
We start the application exercise with STEP 1 sanding. We will learn by applying the BATUR3D PO...
12) Application of STEP 2 (Sanding)
We continue the application exercise with STEP 2 sanding. We have completed the STEP 1 applica...
13) Application of STEP 3 (Sanding)
We continue the application exercise with STEP 3 sanding. Final sanding step. We cleaned the l...
14) Application of STEP 4 (Polishing)
We have completed the sanding steps. The application exercise continues with STEP 4 polishing. ...
15) Application of STEP 5 (Polishing)
We complete the final stage of BATUR3D POLISHING™ and obtain a mirror surface appearance. With...
16) Sample Application from Start to Finish
We completely cleaned the 3D printed part from the layer lines. We have achieved part with an i...
17) Recommended Tool Selection
First we need to get to know the product before we start the application. By examining the part...
18) Effect of Filament Material on Application Time
The effect of ABS vs PLA filament preference on application time. We can make a theoretical an...
19) BATUR3D Painting Process Development Story
Hello everyone. Here is a new application developed by BATUR3D. Working with 3 Step, BATUR...
20) BATUR3D Painting Process
BATUR3D PAINTING™ process main elements and all details are presented to you. When applying, ca...